MPH1608

Product Introduction

Sunlord MPH1608 is a multilayer chip power inductor from the MPH series in 0603 (1.6×0.8mm, thickness 0.55/0.65/0.95mm). Sunlord’s trench technology raises DC-bias current and cuts DC resistance versus conventional multilayer parts, with magnetically shielded construction and no cross-coupling; 0.22μH~10μH from -55°C~+125°C for mobile, wearable and monitoring DC-DC rails.

Core Advantages

• Trench-Technology Multilayer Power Inductors: 0603 (1.6×0.8 mm; 0.55/0.65/0.95 mm heights), 0.22–10 μH — trench-technology multilayer construction — higher bias current and lower DCR.
• Low DCR, high current: DCR 0.10Ω~0.56Ω; saturation current up to 1.60A — high DC-bias performance in a 0603 body.
• Supply: YQM ELECTRONICS holds Sunlord stock with fast samples, datasheets and FAE support for volume programs.

Key Specifications

Cross Reference & Replacement

Cross-reference alternatives:

• Cyntec — A same-spec part from a globally recognized maker — compatible footprint, fully documented (not detailed in our datasheet), stable worldwide supply; a proven alternative.
• TDK — A same-spec part from a leading passive-component maker — matched process and key parameters; widely used as an alternative in the supply chain.
• Microgate — A same-spec part from a leading Chinese passive-component maker — land-pattern compatible, ample domestic capacity, short lead times and strong cost-performance for localized BOM programs.

Applications

FAQ

Q: What is trench technology in MPH inductors?

A: Trench-formed internal electrodes and optimised magnetic layers pack more effective magnetic path into the same footprint, raising saturation current and lowering DCR compared with conventional multilayer inductors.

Q: Is MPH1608 shielded?

A: Yes — the multilayer body forms a closed magnetic path, so leakage flux and cross-coupling to nearby components are minimal.

Related Products

• → MPH2012
• → MPH2016
• → MPH2520
• → Power Circuits
• → All Inductors
• → Sunlord Products
• → Browse All Products