SPH252010H

Product Introduction

Sunlord SPH252010H is a wire-wound SMD power inductor from the SPH series in 252010 (2.5×2.0×1.0mm), using a magnetic-glue coated construction. Magnetically shielded with low DCR and high saturation current, it covers 0.24μH~33μH from -40°C~+125°C (including self-heating) for mobile, mobile-PC, wearable and industrial DC-DC converter circuits.

Core Advantages

• Wire Wound SMD Power Inductors (SPH): 252010 (2.5×2.0×1.0 mm), 0.24–33 μH — magnetic-glue coated shielded structure — low DCR, high Isat and low buzz noise.
• Low DCR, high current: DCR 0.028Ω~1.770Ω; saturation current up to 4.60A — high DC-bias performance in a 252010 body.
• Supply: YQM ELECTRONICS holds Sunlord stock with fast samples, datasheets and FAE support for volume programs.

Key Specifications

Cross Reference & Replacement

Cross-reference alternatives:

• TDK — A same-spec part from a globally recognized passive-component maker — compatible footprint, matched process and key parameters, stable worldwide supply; a proven drop-in for this application class.
• Murata — A same-spec part from a leading passive-component maker — matched core features such as magnetic shielding and low DCR; widely used as an alternative in the supply chain.
• Sumida — A same-spec part from a globally recognized passive-component maker — compatible footprint, matched process and key parameters, stable worldwide supply; a proven drop-in for this application class.

Applications

FAQ

Q: What is a magnetic-glue coated construction?

A: The winding is encapsulated in magnetic adhesive instead of a ferrite clamp — a smaller, lower-profile, magnetically shielded body with low buzz noise under load.

Q: Is SPH252010H suitable for high-temperature environments?

A: Yes — the rating covers -40°C~+125°C including self-temperature rise, with inductance tested at 1 MHz / 0.1 MHz, 1 V.

Related Products

• → SPH3010H
• → SPH4012H
• → SPH201610H
• → Power Circuits
• → All Inductors
• → Sunlord Products
• → Browse All Products