SG3225HBN
- Marca： EPSON
- Tamaño / Encapsulado： 3.2 x 2.5 x 1.0 mm
- Parámetro： 100-325MHz
- Voltaje de alimentación： 2.5V,3.3V
- Salida： HCSL
- Tolerancia de frecuencia： ±50ppm
- Temp. de funcionamiento： -40℃~+105℃
- Encapsulado： 6P 3225
- Parámetro de producto
- Marca： EPSON
- Tamaño / Encapsulado： 3.2 x 2.5 x 1.0 mm
- Parámetro： 100-325MHz
- Voltaje de alimentación： 2.5V,3.3V
- Salida： HCSL
- Tolerancia de frecuencia： ±50ppm
- Temp. de funcionamiento： -40℃~+105℃
- Encapsulado： 6P 3225
Specifications
| Item | Symbol | Specifications | Conditions / Remarks |
| Output frequency range | f0 | 100MHz to 325MHz | Please contact us for inquiries regarding available frequencies. |
| Supply voltage | VCC | D:2.5V ±0.125V, C:3.3V ±0.165V | |
| Storage temperature | T_stg | -55℃ to +125℃ | Store as bare product. |
| Operating temperature | T_use | G: -40℃ to +85℃, H: -40℃ to +105℃ | |
| Frequency tolerance | f_tol | J: ± 50 × 10-6 | Includes initial tolerance, temperature change, |
| (Not available H: -40℃ to +105℃) | Vcc change and 10 years aging(+25 °C) | ||
| L: ± 100 × 10-6 | Includes initial tolerance, temperature change, | ||
| Vcc change and 10 years aging(+25 °C) | |||
| Current consumption | ICC | 25 mA Typ. , 35mA Max. | OE=VCC,with output load |
| Disable current | I_dis | 15mA Max. | OE=GND |
| Symmetry | SYM | 45% to 55% | At outputs crossing point |
| Output voltage | VOH | 0.75 V Typ., 0.66V to 0.85V | DC characteristics, single output |
| VOL | 0 V Typ., -0.15V to 0.15V | ||
| Crossing voltage | VCR | 0.25V to 0.55V | |
| Output load condition | L_HCSL | 50Ω | |
| RS | 33Ω | ||
| Input voltage | VIH | 70% VCC Min. | OE terminal |
| VIL | 30% VCC Max. | ||
| Differential output | Rr / Rf | 1 V/ns to 4V/ns | Between -0.15 V and 0.15 V of differential output |
| rise slew rate/ fall slew rate | |||
| Start-up time | t_str | 10ms Max. | Time at minimum supply voltage to be 0 s |
Phase Jitter
| Output | 100 MHz | 125 MHz | 156.25 MHz | 200 MHz | 322.265625 MHz | Supply voltage | |
| frequency | |||||||
| Phase Jitter [fs] | Typ. | 110 | 95 | 85 | 75 | 65 | 3.3V ± 0.165V |
| Offset Frequency | |||||||
| 12 kHz to 20MHz | Max. | 180 | 160 | 140 | 125 | 110 |
External dimensions
(Unit: mm)
OE pin = HIGH : Specified frequency output.
OE pin = LOW : Output is high impedance.
Footprint
(Unit: mm)
In order to achieve optimum jitter performance, it is recommended that the capacitor (0.1 μF + 10 μF)
between Vcc and GND pin should be placed as close to the Vcc pin as possible.
Copiar enlace de producto
Mantenga presionada la imagen para guardar / compartir
investigación
Adhesión exitosa
investigación
Adhesión exitosa
Copyright © YQM ELECTRONICS INTL LIMITED MAPA DEL SITIO
Correo: sales@yqmec.com
点击右上角
分享给朋友吧
