AWL4532-FS
Sunlord सिग्नल सर्किट इंडक्टर (ऑटोमोटिव) SMD। ADAS / इन्फोटेनमेंट सिस्टम के लिए उपयुक्त।
- ब्रांड： Sunlord
- साइज़ / पैकेज： 4.5×3.2×2.9mm
- पैरामीटर： 10μH
- रेटेड करंट： 650mA
- पैकेज： SMD
- ऑपरेटिंग टेम्प： -40℃~+150℃
- एप्लीकेशन： ADAS / इन्फोटेनमेंट सिस्टम
- उत्पाद पैरामीटर
- ब्रांड： Sunlord
- साइज़ / पैकेज： 4.5×3.2×2.9mm
- पैरामीटर： 10μH
- रेटेड करंट： 650mA
- पैकेज： SMD
- ऑपरेटिंग टेम्प： -40℃~+150℃
- एप्लीकेशन： ADAS / इन्फोटेनमेंट सिस्टम
AWL4532-FS | Wire Wound Chip Ferrite Inductors (AWL, PoC)
Product Introduction
Sunlord AWL4532-FS is an automotive wire-wound chip ferrite inductor in 4532 (4.5×3.2×2.9mm), designed for Power-over-Coax (PoC) camera systems. Broadband high impedance filters video noise across MHz–GHz while carrying DC power on the same coaxial cable; high saturation current, low DCR, AEC-Q200 qualified, for ADAS cameras and automotive video links.
Core Advantages
- Wire Wound Chip Ferrite Inductors (AWL, PoC): 4532 (4.5×3.2×2.9 mm), 10 μH ±10%, 650 mA heat-rated current — broadband high impedance across MHz–GHz for PoC video lines, AEC-Q200 qualified.
- Low DCR, high current: DCR 0.35Ω (Max); saturation current up to 650mA — high DC-bias performance in a 4532 body.
- Compliance: Hazardous Substance Free (HSF); AEC-Q200 qualified.
- Supply: YQM ELECTRONICS holds Sunlord stock with fast samples, datasheets and FAE support for volume programs.
Key Specifications
| Parameter | Value |
|---|---|
| Type | Wire Wound Chip Ferrite Inductor (automotive PoC camera) |
| Package Size | 4532 (4.5×3.2×2.9mm) |
| Operating Temperature | -40°C~+150°C |
| Environmental Compliance | Hazardous Substance Free (HSF) |
| Automotive Qualification | AEC-Q200 qualified |
| Inductance Range | 10μH |
| Tolerance | ±10% |
| DC Resistance (DCR) | 0.35Ω (Max) |
| RMS Current (Irms) | 650mA (Max) |
| Self-Resonant Frequency (SRF) | 25MHz (Min) |
Cross Reference & Replacement
Cross-reference alternatives:
- TDK — A same-spec part from a globally recognized maker — compatible footprint, AEC-Q200 qualified, stable worldwide supply; a proven alternative for this application class.
- Murata — A same-spec part from a leading passive-component maker — matched process and key parameters; widely used as an alternative in the supply chain.
- Sumida — A same-spec automotive-grade part from a leading Japanese maker — ferrite/wire-wound process and AEC-Q200 matched; a mature alternative in Japanese automotive supply chains.
Applications
Power-over-Coax camera links — DC power and RF video on one coaxial cable
ADAS surround-view and driver-monitoring cameras
wide-band high-impedance filtering of MHz–GHz video noise
infotainment camera and display links
FAQ
Q: What is a PoC (Power-over-Coax) inductor?
A: In automotive camera links the DC supply and the RF video signal share one coaxial cable. A PoC inductor presents high impedance across MHz–GHz so the video signal is not loaded by the power path, while DC current passes with low DCR.
Q: Which camera systems use AWL4532-FS?
A: ADAS surround-view, rear-view and driver-monitoring cameras, plus infotainment video links that use coaxial cabling.
Related Products
- → AWL1608FS-M01
- → AWL4532
- → Automotive Signal Circuit Inductors
- → All Inductors
- → Sunlord Products
- → Browse All Products
Contact YQM ELECTRONICS for fast samples, competitive pricing, and expert FAE support.
Contact YQM Customer Service
उत्पाद लिंक कॉपी करें
सेव/शेयर करने के लिए तस्वीर को देर तक दबाएं
कॉपीराइट © YQM ELECTRONICS INTL LIMITED साइटमैप
ईमेल: sales@yqmec.com
