SDFL1005
Sunlord सिग्नल सर्किट इंडक्टर SMD। Communicationवीडियो / ऑडियो / कंप्यूटर के लिए उपयुक्त।
- ब्रांड： Sunlord
- साइज़ / पैकेज： 1005 (0402 inch)
- पैरामीटर： 0.047 - 3.3μH
- रेटेड करंट： 10 - 25mA
- पैकेज： SMD
- ऑपरेटिंग टेम्प： -40℃~+85℃
- एप्लीकेशन： Communicationवीडियो / ऑडियो / कंप्यूटर
- उत्पाद पैरामीटर
- ब्रांड： Sunlord
- साइज़ / पैकेज： 1005 (0402 inch)
- पैरामीटर： 0.047 - 3.3μH
- रेटेड करंट： 10 - 25mA
- पैकेज： SMD
- ऑपरेटिंग टेम्प： -40℃~+85℃
- एप्लीकेशन： Communicationवीडियो / ऑडियो / कंप्यूटर
SDFL1005 | Multilayer Chip Ferrite Inductors
Product Introduction
Sunlord SDFL1005 is a multilayer chip ferrite inductor in 1005 (1.0×0.5×0.5mm). The monolithic (sintered one-piece) construction is compact, magnetically self-shielded with no cross-coupling, and compatible with reflow/wave soldering; 0.047μH~3.3μH (1005series) from -40°C~+85°C suits signal-line filtering, EMI suppression and RF matching in communications, AV, computer and consumer designs.
Core Advantages
- Multilayer Chip Ferrite Inductors: 1005 (1.0×0.5×0.5 mm), 0.047–3.3 μH — monolithic sintered ferrite body — compact, self-shielded and SMT friendly.
- Low DCR, high current: DCR 0.45Ω~2.7Ω; saturation current up to 25mA — high DC-bias performance in a 1005 body.
- Compliance: Hazardous Substance Free (HSF), RoHS compliant.
- Supply: YQM ELECTRONICS holds Sunlord stock with fast samples, datasheets and FAE support for volume programs.
Key Specifications
| Parameter | Value |
|---|---|
| Type | Multilayer Chip Ferrite Inductor (SDFL series) |
| Package Size | 1005 (1.0×0.5×0.5mm) |
| Operating Temperature | -40°C~+85°C |
| Environmental Compliance | Hazardous Substance Free (HSF), RoHS compliant |
| Inductance Range | 0.047μH~3.3μH (1005series) |
| Tolerance | J=±7% / K=±10% / L=±15% / M=±20% |
| DC Resistance (DCR) | 0.45Ω~2.7Ω |
| Q Factor | 10~20 |
| Self-Resonant Frequency (SRF) | 28MHz~220MHz |
| Rated Current | 10mA~25mA |
Cross Reference & Replacement
Cross-reference alternatives:
- TDK (MLK/MMZ series) — A same-spec part from a leading global maker — common 0402/1206 footprints, matched shielding and impedance-vs-frequency behavior, stable worldwide supply; proven in communications and consumer-electronics supply chains.
- Murata (LQG series) — A same-spec part from a leading global maker — matched process and key parameters; a proven alternative for this application class.
- Microgate — A same-spec part from a leading Chinese passive-component maker — land-pattern compatible, ample domestic capacity, short lead times and strong cost-performance for localized BOM programs.
Applications
communications, video/audio equipment signal chains
computers, consumer electronics and set-top boxes
signal-line filtering and EMI suppression
RF circuit impedance matching
FAQ
Q: How is SDFL different from a wire-wound RF inductor?
A: SDFL is a monolithic sintered ferrite structure: lower cost, self-shielded and suited to signal filtering and EMI suppression, while wire-wound ceramic types offer higher Q and SRF for precision RF matching.
Q: At what frequency is SDFL1005 specified?
A: The inductance test frequency varies with the value — 50/25/10/4/2/1/0.4 MHz across the range, following the datasheet part-number rule.
Related Products
- → SDFL1608
- → SDFL3216
- → Signal Circuit Inductors
- → All Inductors
- → Sunlord Products
- → Browse All Products
Contact YQM ELECTRONICS for fast samples, competitive pricing, and expert FAE support.
Contact YQM Customer Service
उत्पाद लिंक कॉपी करें
सेव/शेयर करने के लिए तस्वीर को देर तक दबाएं
कॉपीराइट © YQM ELECTRONICS INTL LIMITED साइटमैप
ईमेल: sales@yqmec.com
