WPN3010HS

Product Introduction

Sunlord WPN3010HS is a wire-wound SMD power inductor from the WPN series in 3010 (3.0×3.0×1.0mm), built on a Fe-based metal-alloy core for high saturation current and low DCR. 10μH operates from -40°C~+125°C (including self-heating) in smartphone, set-top-box, VR/AR, notebook, desktop, server and portable-console DC-DC converters.

Core Advantages

• Wire Wound SMD Power Inductors (WPN): 3010 (3.0×3.0×1.0 mm), single 10 μH value, 1.20 A Isat — Fe-based metal-alloy core — high saturation current and low DCR.
• Low DCR, high current: DCR 0.360Ω; saturation current up to 1.20A — high DC-bias performance in a 3010 body.
• Supply: YQM ELECTRONICS holds Sunlord stock with fast samples, datasheets and FAE support for volume programs.

Key Specifications

Cross Reference & Replacement

Cross-reference alternatives:

• Fenghua Advanced — A same-spec part from a globally recognized passive-component maker — compatible footprint, matched process and key parameters, stable worldwide supply; a proven drop-in for this application class.
• Taiyo Yuden — A same-spec part from a leading passive-component maker — matched core features such as magnetic shielding and low DCR; widely used as an alternative in the supply chain.
• Cyntec — A same-spec part from a specialized Taiwanese maker — land-pattern compatible, ample capacity, short lead times and strong cost-performance; widely used in the supply chain.

Applications

FAQ

Q: What does an Fe-based metal-alloy core give me?

A: Metal-alloy powder cores sustain far higher DC bias before saturation than ferrite, so a small WPN part can carry a large current with low DCR and low loss.

Q: How are Isat / Irms defined?

A: Isat is the current at roughly 30 % inductance drop; Irms is the current at ΔT = 40 °C, tested at 1 MHz / 1 V.

Related Products

• → WPN201610H
• → WPN252010U
• → WPN252012H
• → Power Circuits
• → All Inductors
• → Sunlord Products
• → Browse All Products